These are special screw terminals that fit into typical 2.54mm / 0.1in pitch sockets normally reserved for male or female headers. Use these to attach thicker wires to your next electronics project! These will actually fit those nifty radioshack-style solderable breadboards, unlike most of the screw terminals you'll see out there. Just note that these are smaller than you might be used to.
|Current Rating||4 amps|
|Pin Pitch||2.54mm (0.1in)|
|Screw Type||Phillips/Flat Combo|
|Voltage Rating||250 VAC|
|Wire Gauge||22+ AWG|